add matterbridge

1 files changed, 233 insertions, 0 deletions

diff --git a/teleirc/matterbridge/vendor/github.com/klauspost/compress/huff0/bitreader.go b/teleirc/matterbridge/vendor/github.com/klauspost/compress/huff0/bitreader.go
new file mode 100644
index 0000000..504a7be
--- /dev/null
+++ b/teleirc/matterbridge/vendor/github.com/klauspost/compress/huff0/bitreader.go
@@ -0,0 +1,233 @@
+// Copyright 2018 Klaus Post. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+// Based on work Copyright (c) 2013, Yann Collet, released under BSD License.
+
+package huff0
+
+import (
+	"encoding/binary"
+	"errors"
+	"fmt"
+	"io"
+)
+
+// bitReader reads a bitstream in reverse.
+// The last set bit indicates the start of the stream and is used
+// for aligning the input.
+type bitReaderBytes struct {
+	in       []byte
+	off      uint // next byte to read is at in[off - 1]
+	value    uint64
+	bitsRead uint8
+}
+
+// init initializes and resets the bit reader.
+func (b *bitReaderBytes) init(in []byte) error {
+	if len(in) < 1 {
+		return errors.New("corrupt stream: too short")
+	}
+	b.in = in
+	b.off = uint(len(in))
+	// The highest bit of the last byte indicates where to start
+	v := in[len(in)-1]
+	if v == 0 {
+		return errors.New("corrupt stream, did not find end of stream")
+	}
+	b.bitsRead = 64
+	b.value = 0
+	if len(in) >= 8 {
+		b.fillFastStart()
+	} else {
+		b.fill()
+		b.fill()
+	}
+	b.advance(8 - uint8(highBit32(uint32(v))))
+	return nil
+}
+
+// peekBitsFast requires that at least one bit is requested every time.
+// There are no checks if the buffer is filled.
+func (b *bitReaderBytes) peekByteFast() uint8 {
+	got := uint8(b.value >> 56)
+	return got
+}
+
+func (b *bitReaderBytes) advance(n uint8) {
+	b.bitsRead += n
+	b.value <<= n & 63
+}
+
+// fillFast() will make sure at least 32 bits are available.
+// There must be at least 4 bytes available.
+func (b *bitReaderBytes) fillFast() {
+	if b.bitsRead < 32 {
+		return
+	}
+
+	// 2 bounds checks.
+	v := b.in[b.off-4 : b.off]
+	v = v[:4]
+	low := (uint32(v[0])) | (uint32(v[1]) << 8) | (uint32(v[2]) << 16) | (uint32(v[3]) << 24)
+	b.value |= uint64(low) << (b.bitsRead - 32)
+	b.bitsRead -= 32
+	b.off -= 4
+}
+
+// fillFastStart() assumes the bitReaderBytes is empty and there is at least 8 bytes to read.
+func (b *bitReaderBytes) fillFastStart() {
+	// Do single re-slice to avoid bounds checks.
+	b.value = binary.LittleEndian.Uint64(b.in[b.off-8:])
+	b.bitsRead = 0
+	b.off -= 8
+}
+
+// fill() will make sure at least 32 bits are available.
+func (b *bitReaderBytes) fill() {
+	if b.bitsRead < 32 {
+		return
+	}
+	if b.off > 4 {
+		v := b.in[b.off-4:]
+		v = v[:4]
+		low := (uint32(v[0])) | (uint32(v[1]) << 8) | (uint32(v[2]) << 16) | (uint32(v[3]) << 24)
+		b.value |= uint64(low) << (b.bitsRead - 32)
+		b.bitsRead -= 32
+		b.off -= 4
+		return
+	}
+	for b.off > 0 {
+		b.value |= uint64(b.in[b.off-1]) << (b.bitsRead - 8)
+		b.bitsRead -= 8
+		b.off--
+	}
+}
+
+// finished returns true if all bits have been read from the bit stream.
+func (b *bitReaderBytes) finished() bool {
+	return b.off == 0 && b.bitsRead >= 64
+}
+
+func (b *bitReaderBytes) remaining() uint {
+	return b.off*8 + uint(64-b.bitsRead)
+}
+
+// close the bitstream and returns an error if out-of-buffer reads occurred.
+func (b *bitReaderBytes) close() error {
+	// Release reference.
+	b.in = nil
+	if b.remaining() > 0 {
+		return fmt.Errorf("corrupt input: %d bits remain on stream", b.remaining())
+	}
+	if b.bitsRead > 64 {
+		return io.ErrUnexpectedEOF
+	}
+	return nil
+}
+
+// bitReaderShifted reads a bitstream in reverse.
+// The last set bit indicates the start of the stream and is used
+// for aligning the input.
+type bitReaderShifted struct {
+	in       []byte
+	off      uint // next byte to read is at in[off - 1]
+	value    uint64
+	bitsRead uint8
+}
+
+// init initializes and resets the bit reader.
+func (b *bitReaderShifted) init(in []byte) error {
+	if len(in) < 1 {
+		return errors.New("corrupt stream: too short")
+	}
+	b.in = in
+	b.off = uint(len(in))
+	// The highest bit of the last byte indicates where to start
+	v := in[len(in)-1]
+	if v == 0 {
+		return errors.New("corrupt stream, did not find end of stream")
+	}
+	b.bitsRead = 64
+	b.value = 0
+	if len(in) >= 8 {
+		b.fillFastStart()
+	} else {
+		b.fill()
+		b.fill()
+	}
+	b.advance(8 - uint8(highBit32(uint32(v))))
+	return nil
+}
+
+// peekBitsFast requires that at least one bit is requested every time.
+// There are no checks if the buffer is filled.
+func (b *bitReaderShifted) peekBitsFast(n uint8) uint16 {
+	return uint16(b.value >> ((64 - n) & 63))
+}
+
+func (b *bitReaderShifted) advance(n uint8) {
+	b.bitsRead += n
+	b.value <<= n & 63
+}
+
+// fillFast() will make sure at least 32 bits are available.
+// There must be at least 4 bytes available.
+func (b *bitReaderShifted) fillFast() {
+	if b.bitsRead < 32 {
+		return
+	}
+
+	// 2 bounds checks.
+	v := b.in[b.off-4 : b.off]
+	v = v[:4]
+	low := (uint32(v[0])) | (uint32(v[1]) << 8) | (uint32(v[2]) << 16) | (uint32(v[3]) << 24)
+	b.value |= uint64(low) << ((b.bitsRead - 32) & 63)
+	b.bitsRead -= 32
+	b.off -= 4
+}
+
+// fillFastStart() assumes the bitReaderShifted is empty and there is at least 8 bytes to read.
+func (b *bitReaderShifted) fillFastStart() {
+	// Do single re-slice to avoid bounds checks.
+	b.value = binary.LittleEndian.Uint64(b.in[b.off-8:])
+	b.bitsRead = 0
+	b.off -= 8
+}
+
+// fill() will make sure at least 32 bits are available.
+func (b *bitReaderShifted) fill() {
+	if b.bitsRead < 32 {
+		return
+	}
+	if b.off > 4 {
+		v := b.in[b.off-4:]
+		v = v[:4]
+		low := (uint32(v[0])) | (uint32(v[1]) << 8) | (uint32(v[2]) << 16) | (uint32(v[3]) << 24)
+		b.value |= uint64(low) << ((b.bitsRead - 32) & 63)
+		b.bitsRead -= 32
+		b.off -= 4
+		return
+	}
+	for b.off > 0 {
+		b.value |= uint64(b.in[b.off-1]) << ((b.bitsRead - 8) & 63)
+		b.bitsRead -= 8
+		b.off--
+	}
+}
+
+func (b *bitReaderShifted) remaining() uint {
+	return b.off*8 + uint(64-b.bitsRead)
+}
+
+// close the bitstream and returns an error if out-of-buffer reads occurred.
+func (b *bitReaderShifted) close() error {
+	// Release reference.
+	b.in = nil
+	if b.remaining() > 0 {
+		return fmt.Errorf("corrupt input: %d bits remain on stream", b.remaining())
+	}
+	if b.bitsRead > 64 {
+		return io.ErrUnexpectedEOF
+	}
+	return nil
+}